Matlab Ode Solver for Kinetic Modelling and Simulation of Claus Process Reactions

Authors

  • Ali Abusaloua Department of Chemical Engineering, Faculty of Engineering, Sabratha University, Sabratha, Libya
  • Emad Alkhenjari Department of Chemical Engineering, Faculty of Engineering, Sabratha University, Sabratha, Libya
  • Muhab Abeid Department of Chemical Engineering, Faculty of Engineering, Zawia University, Libya

Keywords:

Clauss process, Acid gas treatment, Kinetic modelling

Abstract

This paper is focused on a kinetic study and parameter analysis of a chemical reactions in a Claus process of  a sulphur recovery unit at Mellita Gas plant. The chemical reactions that take place either in H2S conversion furnace or in a catalytic converters are  studied by an  analysis procedures that linked a kinetic modelling to a reactors  performance. The  kinetic data of a chemical reactions in a Clauss process were achieved a ProMax (software) simulator. A PROMAX process simulator is installed and connected to a Distribution Control System (DCS) through instrument analysers and transmitters  of  a Claus process in a sulphur recovery unit at Mellita Gas plant. A plant kinetic data were used to estimate  a reactions parameters by a MATLAB code apply a nonlinear curve fitting regression. The developed kinetic model for a multiple reactions that appear in a several differential equations was implemented and solved numerically by ODE45 solver that  available in a MATLAB library. The kinetic model results were visualized and displayed graphically by a MATLAB plot  functions.

Downloads

Download data is not yet available.

References

Samane Zarei , A Modified Kinetic Reaction Scheme for Claus Reaction Furnaces in Oil Refineries, Innov Ener Res. 2018, 7:3. DOI: https://doi.org/10.4172/2576-1463.1000215

Maryam Pahlavan, Mohammad Ali Fanaei, Modelling and Simulation of Claus Unit Reaction Furnace. Iranian Journal of Oil & Gas Science and Technology. 2015, Vol. 5, pp. 42-52,

Cover AE, Hubbard DA, Jain SK, Shah KV, Koneru PB, et al. Review of selected sulfur recovery processes for sng production, Final Report. (1985)

Bassani A, Pirola C, Maggio E, Pettinau A, Frau C, et al. Acid gas to syngas (ag2s™) technology applied to solid fuel gasification: Cutting h2s and co2 emissions by improving syngas production. Appl Ener. 2016, 184, 1284-1291. DOI: https://doi.org/10.1016/j.apenergy.2016.06.040

Zarei S, Ganji H, Sadi M, Rashidzadeh M. Thermo-kinetic modelling and optimization of the sulfur recovery unit thermal stage. Appl . Therm . Eng. 2016, 103: 1095-1104 DOI: https://doi.org/10.1016/j.applthermaleng.2016.05.012

The mathworks, www.mathworks.com, 2002.

Thomson. W, Introduction to Transport phenomena, Prentice-Hall, Inc. ,Upper Saddle River, New Jersey, 2000, USA.

Seorg et al, process dynamics and control, John-Wiley and sons, Inc. 2004

Constantinides. A, Navid. M, Numerical methods for Chemical engineers with MATLAB Applications, Prentice-Hall International Series in The Physical and Chemical Science, 1999, USA.

Lee. H, Mathews. C, A MATLAB Method of Lines Template For Transport Equations, Environmental Modelling & Software. 2004, 19, 603-614. DOI: https://doi.org/10.1016/j.envsoft.2003.08.017

Caracotsios. M, Stewart. E, Sensitivity analysis of Initial-Boundary-Value Problems with Mixed PDEs and Algebraic Equations, Application to Chemical and Biochemical Systems, Computers and chemical Engineering, vol.19, pp. 1019-1030. DOI: https://doi.org/10.1016/0098-1354(94)00090-B

[Lin et al, MWRtools: a library for weighted residual method calculations, Computers and Chemical Engineering, 1999, 23, 1041-1061. DOI: https://doi.org/10.1016/S0098-1354(99)00272-0

Wouwer et al., Special Issue on the Method of Lines: Dedicated to Keith Miller, Journal of Computational and Applied Mathematics. 2005, 183, 241-244. DOI: https://doi.org/10.1016/j.cam.2004.12.029

Report of "Specification of Mellitah Gas Plant Project & Operation Process" (2003). AgipGas BV, Libyan Branch, AGBV Job No. 0177/NC/02, AGBV Doc. No. G-65-Y-O-5801 00.

Wahid Salem Alzamzam, Efficiency Evaluation for Sulphur Recovery Unit at Mellitah Complex, MsC thesis, Environmental Engineering Department, Sabratha University, 2020.

Abusaloua.A, Shagan. I, Friendly Electrochemical Process for Destruction of Organic Waste, 2nd International Petroleum Engineering Conference (IPEC-2014), June 17-19 / 2014, Tripoli, Libya.

Abusaloua. A, Ordinary Differential Equation Solver for Mathematical Model Reactions,

st Conference of Applied Science, , Septemper 19-20 /2017, Zintan University, Libya.

Fogler. H. Scott, Elements of Chemical Reaction Engineering, 3rd edition, Prentice Hall, Inc, upper saddleriver, Newjersy, USA.

Miller. D, Frenklash. M, Sensivity Analysis and Parameter Estimation in dynamic model, International Journal of chemical kinetics. 1963, 15, 677. DOI: https://doi.org/10.1002/kin.550150709

Nader Javanmardi Nabikandi, Shohreh Fatemi, Kinetic modelling of a commercial sulfur recovery unit based on Claus straight through process: Comparison with equilibrium model, Journal of Industrial and Engineering Chemistry, 2015, 30, 50-63. DOI: https://doi.org/10.1016/j.jiec.2015.05.001

Downloads

Published

2021-12-31

Conference Proceedings Volume

Section

المحور الرابع: الهندسة الكيميائية والنفطية والجيولوجية

How to Cite

Abusaloua, A. ., Alkhenjari, E. ., & Abeid, M. . (2021). Matlab Ode Solver for Kinetic Modelling and Simulation of Claus Process Reactions. Conference On Engineering Science and Technology, 6(5، مجلة الجامعة الأسمرية), 747-736. https://conf.asmarya.edu.ly/index.php/cest2021/article/view/154